Brother HL-L2395DW Unboxing Setup

Hope you have completed the shipment process of the Brother HL-L2395DW printer successfully.

Now check if the printer box is sealed properly.

Open the box and remove all the packing materials & printer components of the printer.

Keep the printer components on a flat surface.

Take the Brother HL-L2395DW Setup printer from the box and place it on a flat surface.

Peel off the packing tapes from the printer.

Also, remove the blue-colored tapes.

Open the scanner access door of the printer.

Remove the plastic sheet on the scanner glass.

Open the front access cover of the printer.

Unpack the drum unit & toner cartridge provided in the printer package.

Remove the orange-colored packing materials from the drum unit.

Insert the drum unit & toner cartridge into the printer.

Close the cover at the front.

Download & install the newest version of the Brother HL-L2395DW printer software on your computer.

Connect the devices and complete the setup.

Comments

Post a Comment

Popular posts from this blog

Brother HL 2275DW Printer Setup

 How to Install Brother HL 2275DW Printer? After getting the Brother HL 2275DW Printer Setup from the manufacturer, check if it is sealed properly. Unbox the printer box and ensure the printer components are provided in it. Take the packing materials from the printer. Open the front door of your printer. Take the drum unit from the printer. Then, remove the silica gel pack and orange colored tape from the drum unit. Find a long orange colored tape under the printer and remove it. Fix the drum unit back to the printer. Now close the front panel of the printer. Link the power cord to the respective port of the printer and electrical outlet. Power up the printer by force pressing its power button, and complete the first time printer setup.
Read more

HP Smart Tank 515 Wireless Setup

 Check to ensure that your HP Smart Tank 515 printer’s hardware setup is completed and ready for the wireless setup. Gather your wireless network’s credentials, such as SSID and password. Ensure that your computer (that you're using) is connected to the same network to which you’re about to connect the printer.  Check if your printer is in network setup mode. If not, restore the network settings of your printer to default to enable the network setup mode. To do so, follow the instructions below. Make sure that your HP Smart Tank printer is turned on. Locate the Wi-Fi and Cancel buttons on your printer’s control panel. Now, hold down both the buttons at the same time. Release the buttons after five seconds. Now, your printer’s network settings will be restored. *Note: You can also use your printer’s EWS page to restore its network settings. Download and run the HP Smart Tank 515 printer software on your computer. When prompted, select the Wi-Fi Connection option and follow the ...
Read more

123.hp.com/oj4652 Setup

 How to Setup HP Officejet 4652 Printer? When you buy a printer for the first time, you must follow certain steps and guides to unload and setup the printer. Get the printer ready to print documents or photos. Take out the printer from the box, and then discard all tape and packing material from the printer. Take off the packing material from the scanner glass and the ink cartridge access lid. Confirm that you detach all hardware and materials from the box before you dispose or recycle the box and packing material. Link the power cord to the printer and set the preferences based on your convenience. Drag the input tray, mount the paper into the tray and the close the input tray. If the tray is not fixed into the correct place, a paper jam may occur. Place the 123.hp.com/oj4652 ink cartridge into its appropriate slot. Insert the tri-color cartridge into the left slot and position the black cartridge into the right slot. Your printer calibrates and aligns the cartridges. Once the al...
Read more