Canon Pixma TS9520 Unboxing Setup

 Place The printer In A Right Place

Unpack the Canon PIXMA TS9520 printer and remove all the protective tapes and tags from the printer.

Lift the scanner unit, remove the orange tape and other protective materials, and lower the scanner unit.

Place the printer near the router in order to reduce any interference.

Unpack all the components that came along with the package.

Power On The Canon Pixma TS9520 printer

Connect your printer to a power source with the help of the printer’s power cord.

Press the power button on your Canon Pixma TS9520 printer and turn it on.

Use the directional buttons to set your preferred language. Ensure to save the details you have entered.

Canon Pixma TS9520 Ink Installation

Open the scanning unit to install the ink cartridges on your printer.

Unpack one of the FINE cartridges that came along with the package.

Hold the cartridge by its side and remove the protective tapes from it.

Insert the cartridge into its slot and press it until you hear it click.

Repeat the same step to install other FINE cartridges on your printer.

Finish installing the cartridges and close the scanning unit.

Go to the printer's control panel and follow the on-screen instructions to complete the Canon Pixma TS9520 ink setup.

Canon Pixma TS9520 Paper Installation

You may now see the 'Start alignment to improve print quality?' message on the printer's control panel. Select YES and proceed to install papers.

Tray 1:

Open the rear tray cover, straight up the paper support, and fold back at the end.

Next, open the feed slot cover and slide out the paper guides to their extreme.

Load a stack of paper with the print side facing upwards.

Slide in the paper guides and adjust the guides until they touch the paper.

Close the feed slot cover on your printer.

Go to the printer's control panel. You may see the paper settings confirmation message on the screen. Follow the on-screen instructions and complete the Canon Pixma TS9520 paper setup.

Canon Pixma TS9520 Software Setup             

Visit Canon's official page to download the printer software for your Canon PIXMA TS9520 printer.

Run the installer and follow the instruction to complete the Canon PIXMA TS9520 printer setup.

Comments

Post a Comment

Popular posts from this blog

HP Smart Tank 515 Wireless Setup

 Check to ensure that your HP Smart Tank 515 printer’s hardware setup is completed and ready for the wireless setup. Gather your wireless network’s credentials, such as SSID and password. Ensure that your computer (that you're using) is connected to the same network to which you’re about to connect the printer.  Check if your printer is in network setup mode. If not, restore the network settings of your printer to default to enable the network setup mode. To do so, follow the instructions below. Make sure that your HP Smart Tank printer is turned on. Locate the Wi-Fi and Cancel buttons on your printer’s control panel. Now, hold down both the buttons at the same time. Release the buttons after five seconds. Now, your printer’s network settings will be restored. *Note: You can also use your printer’s EWS page to restore its network settings. Download and run the HP Smart Tank 515 printer software on your computer. When prompted, select the Wi-Fi Connection option and follow the ...
Read more

BROTHER MFC-T4500DW SETUP

 Quick instructions to set up the Brother MFC-T4500DW multi-function color printer Open your Brother printer's product box. You can find the Brother MFC-T4500DW printer, a set of ink bottles, a quick setup guide, a product safety guide, a power cord, an installation disc, USB interface cable, and telephone line cord. Now, take all the components and the printer out of the box. Unpack your printer completely by removing the packing tapes or materials surrounding or present inside & outside the printer. Place the Brother printer on a clean surface area.  Now, remove the printer's paper tray. Based on the paper type that you're loading, align the paper width guides correctly. Load a stack of paper in the tray and place the tray back into the printer. Connect your Brother printer to an electrical outlet and turn it on. Once the printer becomes stable, set the basic printer preferences by following the instructions displayed on the printer screen. After setting them, open th...
Read more

Xerox Versalink C7025 Setup

 XEROX VERSALINK C7025 UNBOXING SETUP Initially, take the Xerox printer out of the box and unpack it completely. Place the unpacked printer on a clean surface. Now, get the toner cartridges provided along with the printer box. Shake the cartridges before unpacking them. Now, open your Xerox printer’s front door. Install the unpacked toner cartridges one by one into their slots and close the front door. Pull out your printer’s front tray. Align the width guides and load paper in the tray. After loading the paper, adjust the width guides correctly and push the tray towards the printer. If necessary, install the optional components into the printer. Now, connect your printer to an electrical outlet and turn it on. Next, you need to set the initial settings of the printer. Perform the initial setup by following the on-screen instructions. Once it is done, begin the printer software installation on your computer. Finally, perform a test print operation to check whether the Xerox VersaL...
Read more