Epson ET 2760 Printer Setup

 Unpacking the printer 

Check if all the essentials components are included in the box.

Take all the protective materials from the outside and inside of the Epson ET 2760 printer.

Also, peel off the protective tapes from it.


Filling ink tanks

Raise the printer’s top cover.

Lift the ink tank cover and open the black ink tank cap.

Remove a new black ink bottle from the package.

Fill the black ink tank with ink.

Close the black ink tank cap.

Do the same to fill the rest of the ink tanks.

Close the printer’s top cover properly.


Power connection

Plug the printer’s power cord into an electrical outlet.

Lift the control panel and press the Power button.

This will power up the Epson ET 2760 printer setup.


Initial settings

Using the navigation buttons, choose your language and press OK.

Proceed with the LCD panel instructions to finish the ink charging process.


Loading paper

Raise the paper support.

Place paper with its glossy or printable side facing up in the feed slot.

Pull the output tray out from the printer.

Set the paper settings on the printer’s control panel.


Installing a printer software

Make sure the Epson printer is not connected to your computer.

Insert the setup CD into the computer’s CD-ROM drive.

Proceed with the prompts to finish the installation.

Note: If your computer does not have a CD-ROM drive or lost the setup CD, download the Epson ET 2760 printer software from the official Epson ET 2760 printer setup web page.

While installing it, you will see the Select Your Connection window on the screen.

Choose a connection type and establish the connection between the printer and computer.

Comments

Post a Comment

Popular posts from this blog

HP Smart Tank 515 Wireless Setup

 Check to ensure that your HP Smart Tank 515 printer’s hardware setup is completed and ready for the wireless setup. Gather your wireless network’s credentials, such as SSID and password. Ensure that your computer (that you're using) is connected to the same network to which you’re about to connect the printer.  Check if your printer is in network setup mode. If not, restore the network settings of your printer to default to enable the network setup mode. To do so, follow the instructions below. Make sure that your HP Smart Tank printer is turned on. Locate the Wi-Fi and Cancel buttons on your printer’s control panel. Now, hold down both the buttons at the same time. Release the buttons after five seconds. Now, your printer’s network settings will be restored. *Note: You can also use your printer’s EWS page to restore its network settings. Download and run the HP Smart Tank 515 printer software on your computer. When prompted, select the Wi-Fi Connection option and follow the ...
Read more

BROTHER MFC-T4500DW SETUP

 Quick instructions to set up the Brother MFC-T4500DW multi-function color printer Open your Brother printer's product box. You can find the Brother MFC-T4500DW printer, a set of ink bottles, a quick setup guide, a product safety guide, a power cord, an installation disc, USB interface cable, and telephone line cord. Now, take all the components and the printer out of the box. Unpack your printer completely by removing the packing tapes or materials surrounding or present inside & outside the printer. Place the Brother printer on a clean surface area.  Now, remove the printer's paper tray. Based on the paper type that you're loading, align the paper width guides correctly. Load a stack of paper in the tray and place the tray back into the printer. Connect your Brother printer to an electrical outlet and turn it on. Once the printer becomes stable, set the basic printer preferences by following the instructions displayed on the printer screen. After setting them, open th...
Read more

Xerox Versalink C7025 Setup

 XEROX VERSALINK C7025 UNBOXING SETUP Initially, take the Xerox printer out of the box and unpack it completely. Place the unpacked printer on a clean surface. Now, get the toner cartridges provided along with the printer box. Shake the cartridges before unpacking them. Now, open your Xerox printer’s front door. Install the unpacked toner cartridges one by one into their slots and close the front door. Pull out your printer’s front tray. Align the width guides and load paper in the tray. After loading the paper, adjust the width guides correctly and push the tray towards the printer. If necessary, install the optional components into the printer. Now, connect your printer to an electrical outlet and turn it on. Next, you need to set the initial settings of the printer. Perform the initial setup by following the on-screen instructions. Once it is done, begin the printer software installation on your computer. Finally, perform a test print operation to check whether the Xerox VersaL...
Read more