Fixed: Canon Tr4720 Paper Jam

 Paper jam is very common in printers. A paper jam occurs if you fail to load the paper correctly or loaded unsupported paper format. Make sure you load unwrinkled, plain white paper or other supported paper formats.

Remove Jammed Paper Via Paper Output Slot

  • Grip the jammed paper firmly and pull the paper out slowly. Make sure you do not leave any torn paper inside.
  • Press the OK button on the printer's control panel.
  • Now, try to reprint the page you were printing. If the printer does not print properly, cancel all print jobs and redo the printing.

Remove Jammed Paper Via Feed Slot Of The Front Tray

  • Fold the output tray extension and paper output support.
  • Close the output paper tray.
  • Gently grip the jammed paper with both hands and remove the paper slowly.
  • Ensure there is no jammed paper left behind.
  • Load plain paper in the front tray.
  • Open the output paper tray and extend the output tray extension.
  • Press the printer's OK button.
  • The printer will resume its printing operation.

Remove Jammed Paper Inside the Printer

  • Turn off your Canon TR4720 printer.
  • Put back the output tray extension and paper output support in their place.
  • Release the paper output cover.
  • Check whether the jammed paper is under the cartridge holder.
  • Grab the jammed paper firmly.
  • Slowly remove the jammed paper so you don't tear the paper leaving a part under the cartridge holder.
  • Check if all jammed paper is removed.
  • Put back the paper output tray in its position.
  • Plug the printer into a socket and turn it on.
  • Load unwrinkled paper and resume the printing task.

Comments

Post a Comment

Popular posts from this blog

HP Smart Tank 515 Wireless Setup

 Check to ensure that your HP Smart Tank 515 printer’s hardware setup is completed and ready for the wireless setup. Gather your wireless network’s credentials, such as SSID and password. Ensure that your computer (that you're using) is connected to the same network to which you’re about to connect the printer.  Check if your printer is in network setup mode. If not, restore the network settings of your printer to default to enable the network setup mode. To do so, follow the instructions below. Make sure that your HP Smart Tank printer is turned on. Locate the Wi-Fi and Cancel buttons on your printer’s control panel. Now, hold down both the buttons at the same time. Release the buttons after five seconds. Now, your printer’s network settings will be restored. *Note: You can also use your printer’s EWS page to restore its network settings. Download and run the HP Smart Tank 515 printer software on your computer. When prompted, select the Wi-Fi Connection option and follow the ...
Read more

BROTHER MFC-T4500DW SETUP

 Quick instructions to set up the Brother MFC-T4500DW multi-function color printer Open your Brother printer's product box. You can find the Brother MFC-T4500DW printer, a set of ink bottles, a quick setup guide, a product safety guide, a power cord, an installation disc, USB interface cable, and telephone line cord. Now, take all the components and the printer out of the box. Unpack your printer completely by removing the packing tapes or materials surrounding or present inside & outside the printer. Place the Brother printer on a clean surface area.  Now, remove the printer's paper tray. Based on the paper type that you're loading, align the paper width guides correctly. Load a stack of paper in the tray and place the tray back into the printer. Connect your Brother printer to an electrical outlet and turn it on. Once the printer becomes stable, set the basic printer preferences by following the instructions displayed on the printer screen. After setting them, open th...
Read more

Xerox Versalink C7025 Setup

 XEROX VERSALINK C7025 UNBOXING SETUP Initially, take the Xerox printer out of the box and unpack it completely. Place the unpacked printer on a clean surface. Now, get the toner cartridges provided along with the printer box. Shake the cartridges before unpacking them. Now, open your Xerox printer’s front door. Install the unpacked toner cartridges one by one into their slots and close the front door. Pull out your printer’s front tray. Align the width guides and load paper in the tray. After loading the paper, adjust the width guides correctly and push the tray towards the printer. If necessary, install the optional components into the printer. Now, connect your printer to an electrical outlet and turn it on. Next, you need to set the initial settings of the printer. Perform the initial setup by following the on-screen instructions. Once it is done, begin the printer software installation on your computer. Finally, perform a test print operation to check whether the Xerox VersaL...
Read more